Water Bores Canning Vale

Canning Vale water bore drilling.

RIMG0180 JPG (2)

Drilling a submersible garden bore

The sandy soils and shallow water table make most of Canning Vale ideal for a submersible water bore.

Stainless Steel submersible Pump tpical in Canning Vale Bore

Stainless Steel Submersible Pump typical in a modern Canning Vale Bore.

Virgin Bores are the local experts for the economical drilling of  Canning Vale water bores. The Perth Groundwater Atlas and our extensive local knowledge tells us quite accurately the depth to water in Canning Vale and from this we can give an accurate fixed price bore cost in advance. Our experience in the area including Jandakot and Parkwood guarantees you the best bore for your conditions.

Typical depth for a Canning Vale bore.

A common depth to water would be in the 4 to 6 metre range. Normally we drill 12 plus metres beneath the water table so the typical  depth of a Canning Vale submersible water bore is 18 metres to 20 metres. Some bores in the more elevated position on the larger blocks to the south of  South Street can be deeper than this.

Typical groundwater data in Canning Vale and Jandakot

Typical groundwater data in Canning Vale

Installed  inside the hidden 100mm bore casing is a stainless steel submersible pump and motor. These operate silently below ground pushing water to the surface. Often the pump would be a 1.1 kw model giving two to three times the flow that came from mains water. When plumbed in to existing reticulation systems this extra flow is accommodated by getting  two or three stations to come on at once. This has the added bonus of  reducing pump run time.

Call us any time on 9246 0111 and we can give you a new bore price over the phone or email you a design and quotation. More info on Perth water bores is available here.

We service bores and retic

We service bores and retic.

Canning Vale Bore Repairs.

Joining submersible pump electrical cable

Joining submersible pump electrical cable

Retic controller repairs

Retic controller repairs

Retic connected to 2 bores.

Reticulation system connected to 2 bores.

Experienced bore electrician

Experienced bore electrician

Our mobile bore service teams and pump electricians do prompt repairs to all types and brands of existing bores and bore pumps all over Canning Vale, Parkwood and Jandakot. We repair modern submersible bores, older well style bores with centrifugal pumps, we fix priming problems and all bore and retic related electrical problems. As local area specialists we are fast and reliable. Our experience and local knowledge saves you money. Call 24/7 to book a service man to repair your bore, pump or broken retic  in Canning Vale and surrounding suburbs. Insurance repairs of fused pumps are our specialty. If your bore is tripping the circuit breaker our electricians will fix it. Call us if your reticulation controller is playing up or you just need a broken sprinkler or burst pipe repaired. 9246 0111 or more info and online booking here.