Our Swan Valley bore service team is ready to get your bore or retic back a up and running fast. We do prompt repairs to bores, pumps, retic and any related electrical problems. We are ready to help in Baskerville, Millendon, Herne Hill, Brigadoon, Caversham, The Vines, Upper Swan and Middle Swan.
Please call 7 days 9246 0111 to have us fix your bore promptly or request a bore service online here and we will phone you back.
Fast repairs to bores and retic in the Swan Valley
Specialist Bore Electrician
Our bore and pump electrician will attend and fault-find any bore or irrigation related problem with a minimum of fuss.
Our bore electrician diagnoses bore faults and recommends solutions.
Years of local Experience
Many years of service and repairs to bores, pumps and reticulation in the Swan Valley means our experience will save you time and money. We fix submersible bores and pumps commonly installed in the last 30 years and the shallower older well-liner style bores that have centrifugal pumps. Please call 7 days 9246 0111 to have us fix your bore promptly or request a bore service online here and we will phone you back. We are ready to help with any bore, electrical or reticulation problem in Baskerville, Millendon, Herne Hill, Brigadoon, Caversham, The Vines, Upper Swan, Middle Swan and surrounding suburbs.
Submersible bore repairs.
Common submersible water bore problems we fix include :
- bore tripping circuit breaker or blowing mains fuse
- low flow from bore
- bore not starting
- blown start capacitor
- electrical issues
- insurance fusion claims for burnt out or fused pumps
- blown poly rising main where pump has been “dead-headed” (run with nowhere for the water to pump)
Portable winch makes easy work of pulling up submersible pumps.
We have carry portable winches purpose built to pull up submersible pumps with minimum risk. The battery powered winches can be assembled in the tightest of locations or in middle of a paddock.
New submersible pump ready to be installed back down the bore hole.
Common bore repairs are often found to be simple fixes such as deteriorated wiring in the bore-head junction, blown rising main poly lines or problems with the bore start box, 3 phase DOL starter or irrigation controller.
Blown 40 mm poly pipe after dead-heading of submersible pump.
If a new pump or motor is needed we will quote in advance. We stock a broad array of submersible pumps so delays are limited. We carry both 3 phase and single phase submersible pump motors from .55kw up to 5kw with matching “wet-ends” of various impeller configurations. We will specify the right pump to suit bore depth and flow requirements.
Old well-liner type bores
We work on the older style well-liner bores with centrifugal pumps
There are still some older style centrifugal pumps in well liner type bores in the area. We still repair or replace pumps in those early types if they are in 4 concrete liners or less. If yours is deeper give us a call to discuss the options depending on your bores symptoms.
- check valves replaced
- priming issues addressed
- electrical problems fixed.
- we convert manual systems to automatic
Old well style pump in concrete liner
Repairs, service and maintenance of anything to do with water bores, pumps and reticulation. Call 9246 0111 any day of the week or request a bore or reticulation repair here and we will call you back. Prompt bore service in all of the Swan Valley, Baskerville, Millendon, Herne Hill, Brigadoon, Caversham, The Vines, Upper Swan, Middle Swan and surrounding suburbs.