New water bore City Beach
Shown here is a new water bore done in the area of City Beach, a Perth coastal suburb. In this first pic just the bore has been drilled and the casing is exposed ready to be cut down and the submersible bore pump installed.
Ready to install a submersible pump.
When we visit your home to talk about your new water bore, one of our specialist team will talk to you about the best spot for the bore. There are a number of factors involved such as access for the drilling rig, the customer’s preference and the length cable run for the specialist bore electrician. For this City Beach bore the best location for the new water bore was the drive-way. We have done hundreds of new water bores in driveways and can restore the paving for the client. If there is an maintenance issue with the water bore down the track if is obviously easier if the bore is in the garden or lawn but sometimes that is just not possible.
As you can see in this City Beach water bore the PVC bore casing is yet to be cut down. When the pump and the electrical is done on the City Beach water bore the PVC bore casing is cut down to the level of the drive way and a small green plastic lid is located to the top of the bore just below ground level. The green bore lid is 400 mm by 300 mm. It will be covered over by soil and the paving reinstated over the water bore. It is very important the customer keep an accurate record of where the bore is located if there is an issue with the bore sometime down the track.
Have you been thinking about getting a new water bore call one of our specialist bore consultants and they will address any of your questions or concerns on 9246 0111 or there is lots more information on the rest of our website here