After we have firstly drilled this new bore for a home in Ellenbrook the next step is for the submersible pump to be installed.
Ellenbrook bore drilled to 19 metres before casing cut down
Installing bore pump in Ellenbrook.
Today Adam installed the .75kw submersible pump into the bore we drilled last week. This garden bore was drilled to 19 metres with static water level being at 4 metres. Pretty typical of new water bores in Ellenbrook.
This series of pics shows him cutting down the bore casing, assembling the PM Technology submersible pump motor to the submersible “wet-end” (pump) and installing it inside the bore casing. Finally the bore box is put in place.
First the bore casing is needs to be cut down to below ground level
Digging around the bore casing so bore box can be fitted
Cutting the bore casing down
Casing cut down and bore box in place
Assembling the submersible bore pump
Submersible pump being assembled
Stainless steel submersible from Italy
Installing the submersible bore pump
The bore pump is hung on a stainless steel cable deep underground
The 40mm black poly pipe delivers the water to the surface
Bore is invisible
Once the green bore lid is covered over the bore will be hidden
Tomorrow our electrician will attend and connect the pump electrically to house power and interface it for auto start from the existing Hunter reticulation controller.
The bore will start from the existing Hunter retic controller
Finally our man Jack will attend and connect the pipework up to the existing reticulation and balance the system. You can read more about how a bore is connected to retic here. As last man onsite Jack will bury the bore box so the green lid is under ground level and then tidy up. The entire bore will then be invisible silently pumping free bore water to this Ellenbrook garden.
No wonder customers often say “I wish I’d done it years ago!”
Your garden will flourish – ask for a water bore quote
If you would like a quote on a new water bore in Ellenbrook, Aveley or The Vines please call on 9246 0111 7 days or ask for a bore quote online.
Ellenbrook Bore and Retic service
We also service and repair bores and reticulation systems in Ellenbrook. If you have a problem with your sprinkler system in Ellenbrook, The Vines, Aveley and surrounds we will fix it promptly
Prompt repairs to bores and retic in Ellenbrook and surrounds
Call 92460111 7 days or request a bore or retic service online here.