For enquiries on progress of service jobs or billing OFFICE 9246 0111
Prompt bore service Perth metro-wide
RETICULATION SERVICE: work performed by reticulation technician.
Typically work on sprinkler systems, solenoid valves, pipework, low voltage 24v work on reticulation controllers, solenoid valve location, submersible bore pipe work connection. For work to 240v see Electrician below.
Callout : $150 incl GST includes travel to/fro and first 30 minutes onsite
Hourly rate: $99 incl GST Plus parts as required
Well stocked retic van saves time.
Onboard retic spare parts
ELECTRICIAN: service or repair work performed by licensed electrical worker or electrical contractor
Typically anything to do with the 240v side of pumps, bores or reticulation including fault-finding, diagnosis, capacitor replacement and insurance work
Callout : $160 incl GST includes travel to/fro and first 30 minutes onsite
Hourly rate: $140 incl GST Plus parts as required
Please note exception: electrical wiring / connection of existing bores by electrical contractor is charged at $150 per hour
Experienced bore electrician working on submersible bore
240v and 415V 3 phase work by bore electrician
SUBMERSIBLE BORE SERVICE : work performed by bore serviceman
Work performed on submersible bores, bore-heads and ancillary control equipment, pump winching, etc,
Callout : $160 incl GST includes travel to/fro and first 30 minutes onsite
Hourly rate: $140 incl GST Plus parts as required
Please note exception: special bore services such as flow and pressure testing or chemical treating/development and clay dispersant application are charged at $150 per hour plus parts and consumables
Stainless steel submersible pumps are used in most modern Perth bores
Prompt repairs to bores and pumps.
Replacing a submersible pump in Two Rocks
Small green lid buried under the surface
CENTRIFUGAL PUMP SERVICE: by bore serviceman on old well-style exposed pumps & related
Work performed on old well-style bores with exposed centrifugal pumps in four concrete liners and less. Including pump and check valve replacement and priming issues.
Callout : $160 incl GST includes travel to/fro and first 30 minutes onsite
Hourly rate: $140 incl GST Plus parts as required
Centrifugal pump replaced in one liner well.
Please note priming issues with old well-style pumps can be affected by a number of related issues and whilst every effort is made to rectify first visit sometimes repeat visits are necessary and chargeable and in some circumstances if a downhole or related problem may not be able to be fixed at all.
BORE LOCATING : by bore serviceman or electrician
Locating of submersible bores or cable tracing
Callout : $160 incl GST includes travel to/fro and first 30 minutes onsite
Hourly rate: $140 incl GST
Cable tracer used to locate submersible bore
Submersible bores normally under lawn but can be under paving
************************************************************************
All above rates updated 09/12/2021
RATES: all rates quoted include GST and are plus parts. Hourly rates are per person. Rates are for greater Perth metropolitan area.